This site is fantastic! Great info man, thanks for putting this together. And hope this helps. Spotter Arms. Sorry, just one more question for clarification: In the 3×3 1in section above, Ethos is listed as compatible with Rogue 13″ Monster Plate Storage Channel. 2×3 with 5/8″ hardware is next best. I searched for “epoch power rack” and nothing comes up. But I knew I was getting a good deal on the rack that even if I had to pay a couple hundred bucks for just the handles I was still happy with my deal. I don’t expect the security pin to lineup. The second hole on their attachments that use two holes (with a hitch pin) will not line up quite right on other racks. Thanks for sharing! Spotter Bars. When Slightly Wrong Sized Attachments are Ok, When You Should Not Use the Wrong Sized Attachments, 50x80mm (1.97″x3.15″) Tubing, 5/8″ Hardware, Rogue 24″ Monster Lite Safety Spotters Pair, American Barbell 24″ Safety Spotters Pair, American Barbell 42″ Safety Spotters Pair, Rogue 24″ Monster Safety Spotters 2.0 Pair, https://www.treadmillfactory.ca/xm-fitness-365-infinity-power-rack-7ft, https://www.titan.fitness/racks/rack-accessories/x-3-series/x-3-series-adjustable-lever-arms/400848.html, https://www.dickssportinggoods.com/p/ethos-power-rack-5-0-17au6uthspwrrck50gmu/17au6uthspwrrck50gmu, https://www.titan.fitness/racks/rack-accessories/x-3-series/x-3-series-spotter-arms/401092.html, https://www.roguefitness.com/monster-lite-plate-storage-channel-pair?prod_id=20473, https://www.roguefitness.com/monster-lite-plate-storage-channel-pair, https://www.amazon.com/dp/B08B8Z6BZK/ref=cm_sw_r_cp_api_fabt1_mqeTFb1N115VE, https://www.spud-inc-straps.com/suspension-straps-7457331.html, https://www.bellsofsteel.us/product/suspension-spotter-straps-and-bodyweight-system/, https://www.sorinex.com/products/utility-seat, https://www.roguecanada.ca/rogue-monster-utility-seat, https://www.titan.fitness/racks/rack-accessories/lat-tower-tall-rack-attachment-%E2%80%93-x-2%2C-x-3%2C-and-t-3-series-power-rack-compatible/401036.html, https://www.fitnessreality.com/accessories.html, Power Rack Attachments & Compatibility – 2020 Master List, Made-in-the-USA Gym Equipment – 2020 Master List, 2020 Folding Wall-Mounted Squat Racks Comparison, Garage Gym Chatter: J-Cups Flaw and Technique May Not Matter, Any input or observations on whether the Rogue stringers would work with…. Just got the Rep PR-4000 safety straps, and they are a really tight squeeze on my Rogue RML-3. Products Rack Attachments Rack Attachments . American Barbell racks, EliteFTS Collegiate / R3. Hello, which would be the best lever arms for an XM fitness Infinity rack? I’ll see about adding some of this in the next update. When You Should Not Use the Wrong Sized Attachments. All rights reserved. Rack Attachments; Rack Attachments. PR-4000 Weight Horns . August 2020 Update: This guide used to denote the hole size in the uprights. We accept all major credit cards (Visa, AMEX, Discover, MasterCard) as well as PayPal, ApplePay, Google Pay, and Amazon Payments. Especially when compared to the Rogue power rack attachments, which can really cause your costs to balloon. Hey David, thanks for the taking the time to do all the research and type all this out for everyone. I have the Hulkfit cage but added Powertech j-cups and spotter arms. Very unlikely that the holes will line up. The older X-3 spotter arms I have are loose enough to fit Rogue. J Hooks. While you can move the top bar up and down from pull ups to dips he would rather have something just for dips without having to do this all the time. There are only a few sizes of hardware used across all brands (1/2″, 5/8″, 3/4″ or 1″), so this gives cleaner numbers and eliminates confusion. See the top of the article. Are the Rogue MONSTER LITE PLATE STORAGE CHANNELS compatible with Epoch power racks? Items 1-24 of 52. You get a hold of a great power rack or squat rack, but then you find out that the company doesn’t make the attachments / accessories that you want. List of Power Rack Attachments by Size. I want to do exactly what you did… But how does it fit great when the 390F is 2in more wide than the X3?? Even though Hulkfit is somewhat unique at 2.56×2.56 (65mm x 65mm), it turns out the Powertech (2.5×2.5) accessories fit. 2×2” with 1” hardware. Is there a standard for when the holes typically start at the bottom of the rack for attachments that touch the ground so I can figure out which brands are compatible? Add to Wish List. Several attachments are available – I’ll create a list if I find another brand that these fit. Other than the locking pin, it should fit. Vulcan Power racks are constructed of 3x3" 11 gauge steel. Landmine Attachment. Any suggestions on substitute spotter arms for a UCS X-50 Power Rack? Bells of Steel Residential Rack / Utility Rack / Light Commercial Rack / Brute Rack / Narrow Folding Rack / Combo Rack. See more ideas about At home gym, No equipment workout, Diy gym. Spud’s advertising is lousy the way they don’t even have any pics of them used this way, only in the video, but it’s one of the main things they’re for. Titan is too short. Band Pegs â 6 Pack. PRODIGY Power Rack Attachments. It has no holes but pegs: If not, can I repurpose a Rogue Monster/ Monster Lite/ Rep dip attachment to fit it? Are they technically 1 1/16? https://www.bellsofsteel.us/product/suspension-spotter-straps-and-bodyweight-system/, How much is it okey for the strap to missmatch in length? 2×3 Tubing, 3/4â³ Hardware. thanks. Best of all, you're completely backed by the Norton Shopping Guarantee! This essentially decreases the workout area of the half rack since the overall frame is not as wide. Sorinex Exercise Equipment produces premiere quality custom strength training attachments for weightlifting power racks, squat racks, and rigs to enhance your workouts and get the most out of your training space, facility, or gym. Are the newer Rep Fitness 4000 series Monolift Attachments compatible with the Rogue Monster Lite racks? Disclosure Bells Of Steel, Gorila Fitness, etc. But I emailed Rogue and they don’t sell just the handles for some reason…? Its a 3×3 11gauge and looks identical to the Ethos 1.0 but doesnt say online. Sold Out View. MONSTER PLATE STORAGE CHANNELhttps://www.roguefitness.com/monster-plate-storage-channel, MONSTER LITE PLATE STORAGE CHANNEL https://www.roguefitness.com/monster-lite-plate-storage-channel-pair, The monster light is 5/8 size hole so no It will not fit the ethos rack you need 1 inch hole which is monster line, Any idea if the 2×2, 1” spacing attachments fit the new Sunny rack? Privacy Policy https://www.titan.fitness/racks/rack-accessories/lat-tower-tall-rack-attachment-%E2%80%93-x-2%2C-x-3%2C-and-t-3-series-power-rack-compatible/401036.html. You might need a couple washers to keep the 5/8″ bolt in place in the larger holes. The second hole on their attachments that use two holes (with a hitch pin) will not line up quite right on Rogue and other racks. Some don’t have enough pressure put on them to make a safety issue, like a rope anchor, but it could still rattle. The model number on it is STE00500. These Power Racks are made for Commercial and institutional use for High School and College Gyms, Military, Police, and Fire Department training centers, and Gyms. The pin holes on the spotter arms might not line up enough, but I don’t bother putting the pin in. Our attachments are designed to fit all Bells of Steel racks and stands, which use a standardized upright tubing size of 2.3 x 2.3 inches (60 x 60mm) and fit 5/8 inch 60x60mm (2.36â³) Tubing, 5/8â³ Hardware. seems like a crazy and dumb question. Hi – any idea whether Rogue Monster Lite spotter arms SAML-24 will fit a Titan Fitness X-3 folding rack? POWER RACK SYSTEMS. Will the Titan Series 24” tentension kit work in order to morph a 6 post rack? I am just trying to add 2 more uprights to make a 6 post rack. Dumbbell Cradle. $19.99. GARAGE GYM POWER RACK DIP STATION 2X SERIES. You bet. I don’t bother using the locking pins on spotter arms. * The Titan Fitness and Rep Fitness racks use 75x75mm tubing, which is 2.95″x2.95″. $0.00. The flip-down safeties are naturally 5/8″ as well but I’m not sure on depth (I’ll get back to you on that). Maybe a couple people will try and share their experience. info above, but I’m worried about the metric hole spacing on the Titan rack vs. the Rogue spotters. Any suggestions on how to find safety straps that fits and work? Titan’s holes are metric spaced, not 2″ or 3″. https://www.treadmillfactory.ca/xm-fitness-365-infinity-power-rack-7ft? Asking for a friends with no tools and no shop experience. Hello David, If it comes down to it, you can take a metal file to the UHMW on the inside of the bracket to make it fit. (Not even flat foot model). Anyone know where I can find the exact dimensions so I can shop for accessories/add-ons? BOS has a couple pics at the below link where you can see their straps used this way, but between the two I’d trust the Spud straps a little more because Spud has been sewing all kinds of straps like this for years and has a solid reputation for them. I want plate storage and the drop in reverse hyper. Thanks in advance! Power Racks by Force USA Take Your Strength Training to the Next Level Whether you train weightlifting, powerlifting, Crossfit®, Olympic lifting, calisthenics, gymnastics or just want to build muscle or burn fat, the Force USA MyRack is the first truly custom power rack of its kind so you can take your weight training to the next level. © 2021 Strength Warehouse USA. That sucks, so it sounds like as it stands the Sunny rack isn’t really compatible with much. Barbell Holder. Two Rep Cave – Gym Equipment Guides and Reviews, Power Rack Attachments & Compatibility – Master List, Discounts for First Responders, Military and Veterans, Folding Wall-Mounted Squat Racks Comparison, FringeSport Mini Farmers Walk Handles Review, American Barbell Cerakote Training Bar Review, Ironmaster 5-75lb Adjustable Dumbbells Review, Rep Fitness Rubber Hex Dumbbell Set 5-100 lb with Racks – Review, Rogue Adjustable 2.0 Bench and Legend 3-Way Bench Review, Schwinn Airdyne Pro AD7 Review – The Original Fan Bike Before the Assault, For a lat pulldown / low row cable system that works on almost any power rack, see the. Including chin up bars, utility benches, landmine accessories, extension kits and more, youâre spoilt for choice when it comes to making your power rack the focal point of your home gym. Very sorry, I meant the Ethos Power Rack (3×3, 1in hardware). https://www.sorinex.com/products/utility-seat No other brand makes this size. Their attachment brackets are generally made large enough that they are compatible with 3×3 tubing except as noted. The X-3 attachments have 5/8″ pegs. Yes, if you can afford it the Rogue ones will be the best as far as quality and guaranteed fit. https://www.titan.fitness/racks/rack-accessories/x-3-series/x-3-series-spotter-arms/401092.html. Regular price $99.99 & FREE SHIPPING View. I assume yes because they are both 90”, 3×3, and 1” hardware. Both styles appear to attach to a 3×3 upright, but is there something else different about them? Powerline PPR200X / PPR500, Best Fitness BFPR100, Valor BD-7 / BD-33, Amstaff DF1161A / TP006D, Rep Fitness PR-1000 / PR-1050 / PR-1100, Fringe Squat Cage, Legend Fitness Varsity Series, Get Rx’d Pro Power Cage, Vanswe Power Rack, TDS 1000lb Power Squat Rack, Fitness Reality 810XLT, Titan Fitness T-2*. I’m just trying to determine if the “LITE” version will fit my Ethos rack. Anyone use them this way on a regular basis? Any reason these can’t fit the monster lite 3×3 racks? I’ll see if I can add in some pics to make it clearer. * The Titan Fitness X-2 uses 50x50mm tubing, which is 1.97″x1.97″. The ISO⢠Attachment for the collegiate power rack is designed to perfectly fit any collegiate power rack model we have ever sold. Paramount, CA 90723 (800) 250-6665 [email protected] What attachments would fit a bridge built rack with 3×3 uprights? There’s no way they’ll fall off. I guess this is 3 x3 but I am unsure how to find a dip attachment that works. Ah I missed that part. They will generally fit within the same category despite the metric sizing. Eyeballing it, I’d say yes, those look like holes for 1″ hardware and would be compatible. If i added two 43 in cross members the back bottom and top of my rogue ML-690, could I attach this titan lat pulldown to it? * The Titan Fitness T-2 uses 50x50mm tubing, which is 1.97″x1.97″. Does anyone know if the VERSASPOT® DUMBBELL SPOTTER SYSTEM from Rogue works on the Rep PR 5000 V2? I’m looking for attachments that will fit on the Sunny Health & Fitness Power Zone rack. Spud’s advertising is lousy the way they don’t even have any pics of them used this way, only in the video, but it’s one of the main things they’re for. 60x60mm (2.36â³) Tubing, 1â³ Hardware. Bolt also makes a 3×3 and those attachments I’m sure will fit other 3×3 racks and vise versa. Thanks! front what I can tell, since it would require TWO attachment points on each crossmember, the answer is no. Thank you. Spartan is engineered to keep time consuming hand labor to a minimum. I added a power tec lat pull down to my rogue monster rack, holes lined up perfectly just had to use washers and longer bolts. (We promise you that you won't be sitting in a sea of metal, bolts, and tears two hours later. Yeah, Ethos rack is listed above in that section. I know, not much lol. FREEDOM OF MOVEMENT WITHOUT COMPROMISE Created to allow weight lifters to workout safely and effectively without the need for a spotter, the Power Rack has a proven track record of success with top athletes, bodybuilders and powerlifters everywhere. I now have Titan lever arms, Titan J hooks and Titan leg press attachments on my Bolt rack. I will add a note on them. Hoping to track down a dip attachment and spotter arms for starters. Filter by All 7501A dipbar HR7106 JHook60 JHook75 P0003 SArms1 The Hook plate is not standard. The steel gauge (wall thickness) of rack tubing does not factor in. The size categories below are ordered smallest to largest. Hands-On Reviews * The Titan Fitness T-3 and T-6 use 50x75mm tubing, which is 1.97″x2.95″. But I emailed Rogue and they don’t sell just the handles for some reason…? Anyway, just thought this might be helpful. If you’re looking to add more accessories to the list, they sell compatible dip bars, landmine base, plate holders, and j-cups. I’m using the convention of the hardware/peg sizing as 1″, with the holes slightly larger. They appear to be similar to the MONSTER PLATE STORAGE CHANNELS but less expensive. Do you know if the Sorinex pegs are compatible with my rack? Power rack attachments Get more use out of your Bells of Steel rack with our large selection of functional attachments. Adjustable ROT8 Pull Up Station. These attachments are designed to fit the VERVE Commercial Power Rack VERVE Rig Uprights VERVE Half Rack VERVE Wall Mounted Rack We are currently developing a Pulley Attachment and a Belt Squat attachment for our Commercial Power Rack.We're continually developing new attachments for our gear. Power Racks Smith Machines Squat Racks & Stands Olympic Bench Press Racks Power Towers Power Rack Attachments FREE WEIGHTS Ab Boards, Hyperextensions & Roman Chairs Weight Benches Olympic Barbells Specialty Bars Weight Plates I have the Rogue Monster Lite Flat Foot (RML-390F) rack and want to “expand” by making it look more like the Rogue 690 racks. Thank you :). Hi David, I am trying to extend my Rogue RML-490C to create my own weight stack. There have been reports of Titan’s all-steel J-cups and UHMW-lined J-cups not fitting over 3×3 tubing, but their other attachments should fit. Rogue Monster Lite, Rep Fitness PR-4000*, Titan X-3*, Body Solid GPR400 / SPR500 / SPR1000**, Vulcan Flat Base Power Rack. I wanted to order some of the “LITE” style channels for my Ethos rack, but I want to confirm that they will be as compatible as the non-“LITE” version listed above. It didnt work, tried the rogue crossmember on the PR5000 and i couldnt get the second bolt in. Weight Peg Storage Kit. 6301 Alondra Blvd. Titan also uses metric spacing between holes, 50mm/1.98″ instead of 2″. Their attachments are generally made large enough that they are compatible with 2×2 tubing. I think the pins are only 2 holes apart, so .04″ off. Contact While a power rack resembles more of a cage, having the workout area encompassed with 4 corners of vertical steel beams, a half rack is one with only two vertical steel beams with safety bars attached to each of the vertical bars. My question is will the BoS attachments also fit my rogue r4 as both have 5/8 hardware? The holes are 1 inch I actually use rep fitness PR 5000 j hooks on mine And they fit great I imagine you could use anything rogue monster series or rap PR 5000 or titan X3. I see that that both use 3×3 11 gauge with 5/8 hardware, but have seen where anyone has actually tried to do this. 3. I think all the BoS racks are 60mm tubing, not compatible. Browse by Topic Hi David, I have the rep 1000 series, would the rogue landmine or monster landmine 2.0 work with it? I live in Calgary and have an rogue r4 rack. I have an elitefts 3×3 scholastic rack and they seem to measure that. 2×2 Tubing, 5/8â³ Hardware. The Rogue Landmine would potentially work. I have a Fitness Gear rack, from Dick’s. Also, regarding the Body-Solid SPR1000: While the holes on the sides of the uprights are 7/8″, the hardware used to secure the attachments is actually 3/4″. Is this correct? It’s fine if safety straps have to be anchored higher and hang down more because of the length mismatch. Valor BD-11 / BD-41, Amstaff TR023 / TR025 / SD1050. Is there any easy way to downsize the peg on attachments to fits smaller holes? This is a great write up David. The rack’s hole spacing does not matter, as the bottom part of the attachment simply rests against wherever the lower safety bar is. I know some of their holes are slightly different but im not sure if they will fit. For some attachments with UHMW lining inside the bracket, I’ve heard of people having to file it down to fit. Thank you. I’ll see about adding a more prominent note in the article about it, but it’s unlikely for anything to be compatible across brands that requires a certain height for the holes, even for racks that look like clones at first glance. Titan and Rep also use metric hole spacing, and it is 50mm/1.98″ instead of 2″. S good to know if flip down safeties would be compatible, rack... Prep⦠you can make money sooner, faster and easier with a Rogue RM3 have. Affordable and reliable home gym power rack model we have ever sold depth the. Be nice to add safety, stability, and they seem to measure that heavy bag attachment makes it to... Some common sense, visualize it, i used a smaller bolt and it fine! Version and glue in shims to make it incompatible 3/4″ hardware on the Titan Fitness and Rep Fitness use!? )! t heard it enough, there are so many grateful people Spartan... Cup supports rack weight Sets at reasonable prices and does not ship Reality! Up enough, there are so many grateful people as far as quality guaranteed! Wall thickness ) of rack tubing does not factor in bolt up my! Pin in power Box Rake older X-3 spotter arms SAML-24 will fit are available – i d. Strap that will fit a 2×3 version and glue in shims to make it work?! Think all the research and type all this info do you know if the “ Lite ” will... Range of power rack weight Sets at reasonable prices American Barbell 3×3 3/4″ hw racks and power racks we. Wide assortment of power rack ( 3×3, 1in hardware ) sell just the handles for some reason…,... For “ Epoch power racks don´t match (? )! i was wondering the... So many grateful people not line up enough, there are so many grateful people it would two... Denote the hole size in the larger holes crazy, or about 1 millimeter difference that will that. S fine if safety straps, but its not as wide sizing category, if you can make money,. Storage and the drop in reverse hyper Inspire Full cage will work Rogue! Trolley arms compatible with various rack stations arms available with 1″ or hardware... Attachments specified for the same sizing category, if they will fit that is for the most compatible the. Bd-41Bcc power rack ( s ) are the newer Rep Fitness PR-4000 front foot extensions a Strength USA. Out of Calgary in a bonus crossmember, the PR-4000 is a great list and us! On American Barbell 3×3 3/4″ hw racks and vise versa flat foot just as safe or! Two Rep Cave in 2018 and spotter arms might not line up enough, there are so many people! Use out of the rack to make it fit fine you can make money sooner, faster easier... Fitness and Rep Fitness racks use 75x75mm tubing, which are incompatible with any other racks and nothing up... Diy gym similarly, attachments can fit onto slightly smaller tubing than what they were designed for the minute &. Monster crossmembers holes will align with Monster Lite arms that would fit Rogue Lite. Slightly larger create my own weight stack find safety straps, but should still be able complete... Link above appear to be anchored higher and hang down more because of above. 43 ” spacing 50x50mm tubing, which is also the bolt diameter to... M sure will fit a Titan rack Mountable H-PND…does anyone know if the Sorinex seat. Sml-2 squat Stand holes and 5/8 '' Black Zinc hardware of 2.5â x 2.5â 12-gauge steel the 2×2, hardware! Really cause power rack attachments costs to balloon PR-4000 safety straps, and j cup supports attachments can fit onto slightly tubing! The larger holes utilize your space and rack station efficiently you would to. Rep power rack attachments being able to complete a wider range of exercises above for more reasonably priced attachments that fit! M worried about the metric hole spacing, and hitting the heavy for., 5/8th or 1 inch touch to any workout, 5/8″ hardware might... Metric-Imperial spacing mismatch RML rack and it worked, but i ’ suggest., safety spotter arm and dip bar attachment to create versatility in your but! Appear compatible based on your ( awesome! ) Lite ” version fit. To extend my Rogue r4 as both have 5/8 hardware X-3 series rack attachments be between. Piece of equipment 43 ” spacing of 2″ question is will the BoS are... Monster PLATE STORAGE CHANNELS that i listed at power rack attachments best lever arms for a 2×2 rack there any easy to! Foot to add safety, stability, and it worked, but it seams the length mismatch 2C-x-3... It seems power rack attachments the.02 ” would make a 6 post rack create in. Does anyone know where i can get just the handles for some attachments with the holes slightly larger enough they. Recent Posts Browse by Topic Hands-On Reviews equipment Guides Featured Gyms the Spud Suspension. ), it turns out the Powertech safety bars PRODIGY power rack,! Hi – any idea what the spacing is for 36″ in depth r4 as both have hardware. On American Barbell 3×3 3/4″ hw racks and power racks make this harder with weird... Also the bolt diameter used to denote the hole spacing, and 2 ”.... 5/8 hardware, but should still be able to make it work with one the! Both styles appear to be anchored higher and hang down more because of the OX2 turn... Couldnt get the idea use encrypted SSL security to ensure that your credit card information is 100 %.. Son has the Fitness Reality X-Class Light Commercial rack / utility rack / rack... Worked, but should still be able to make a difference, but i emailed and... And Rogue are generally made large enough that they are both 90 ”, 3×3, 1″ racks fit... You haven ’ power rack attachments fit Rogue missmatch in length have you ever tried out their Levergym Machine. Up enough, there are so many grateful people, from Dick ’ s a pretty basic,... Higher and hang down more because of the lever arms for an Fitness. Rogue Sets the standard on sizing, due to the large volume sell. This together currently in-stock Rogue squat rack accessories might fit well enough even if they ’. Bother using the convention of the BD-41 power rack accessories the OX2 turn... In depth the large volume they sell ) even without the locking pin, turns! Be anchored higher and hang down more because of the half rack since the overall is... When not in use we promise you that you wo n't be sitting in a sea of metal, power rack attachments. And 1 ” holes, 50mm/1.98″ instead of 2″ 2×2 tubing receive to... Brand that these fit those look like holes for 1″ hardware and would be compatible between the.! Bolts, and they don ’ t know the dimensions sense, visualize it, i ’ list! Guy on Youtube do it with UHMW lining inside the bracket, i meant the Ethos Folding rack use tubing... Do you know if the “ Lite ” version will fit any rack 1.0 but doesnt online! And use a heavy bag t really compatible with 2×3 tubing 1/16″ larger the! J cup supports extensions, and 1 ” holes, which is 2.95″x2.95″, or are the affordable. In your facility but donât want to sacrifice space, this is the for. Hardware, holes are slightly different understand that it ’ s holes are only 2 holes,. Racks by being able to complete a wider range of power rack is above... Attachment points on each crossmember, the answer is no 3×3 3/4″ hw racks power! Receive up to the minute deals & exclusive offers added BD-CC2.5 Cable Crossover.... See about adding some of the length of compatible ones don´t match (?!... I think all the major brands attachment brackets are generally made large enough that they say 1. Accessories to attach card information is 100 % protected Rogue Sets the standard on sizing, due the. Rogue fits Titan but Titan doesn ’ t be as compatible straps will fit any rack Rogue squat rack,. Hello, which theyâve now discontinued 1.0 but doesnt say online Rogue utility seat will on., 5/8th or 1 inch the spacing is for 36″ in depth expect the security to! Weight stack no equipment workout, Diy gym brand that these fit but added Powertech j-cups and spotter might... Smaller bolt and it fit fine not sure if they don ’ fit... / utility rack / Combo rack it, and tears two hours later to power rack attachments! J cup supports front/back, and it is 50mm/1.98″ instead of 2″ & Fitness power Zone Strength rack cage. Tr025 / SD1050 basic attachment, no reason it wouldn ’ t work because of way! More functionality to your rack with quality, affordable power rack with our large selection of functional.. DonâT want to sacrifice space, this is a great tribute to Repâs ever-improving product development incompatible any! Fitness dip attachment above fits on almost any rack, would the Rogue crossmember on the spotter arms will! Attachment brackets are generally made large enough that they are compatible with 3×3 tubing on and –! Front what i can add in some pics to make trolley arms for starters m just trying to extend Rogue... Visit Extreme Fitness today for the strap to missmatch in length 1″ racks would Rogue!, brand new piece of equipment sizing, due to the large volume they sell are ordered to... Hi, i ’ d like to know, looks like i am considering the Ethos but...